krtislav
Primećen član
- Poruka
- 674
nema autoplaya kad ubacim disk, kako da uključim ********?
Donji video pokazuje kako da instalirate aplikaciju na početni ekran svog uređaja.
Napomena: This feature may not be available in some browsers.
А што баш на F: да кликне? Шта ако нема F: драјв на компу?Ubaci disk, mu computer/ desni klik na F:/ i medju opcijama ima ********
Из неког од разлога ти "********" не ради, а да не би ишао од ставке до ставке, најлакши начин да га поново укључиш је помоћу тзв. > ******** Repair Wizardа. Када га покренеш, само му означи који је ЦД драјв у питању и кликни на Repair.nema autoplaya kad ubacim disk, kako da uključim ********?
Унутар групних полиса, налази се и уједно и та полиса за ********, потребно је укључити исту поново. Нема потребе користити програме.
Могуће, видиш нисам на то обратио пажњу, али и да јесте, то је чисто превенције ради, како се не би пренело нешто што не бисмо желели да имамо.Postiji više opcija da se ******** uključi, međutim iz ličnog iskustva, ako je korišten Combofix za čišćenje sistema od virusa, nemoguće je uključiti ******** opciju.
Могуће, видиш нисам на то обратио пажњу, али и да јесте, то је чисто превенције ради, како се не би пренело нешто што не бисмо желели да имамо.
Многи и препоручују искључивање аутоплеја.
U pravu si može i ovako:
Start -> Run -> gpedit.msc -> computer konfiguration ili
user configuration ->
Administrator templates -> System.
E tu imas opciju "******** enable" ili "******** disable"
onda ides na properties i uzmes "enable" ili "disable" i
odaberes sta hoces da iskljucis ili uključiš, dal CDROM ili sve.
Evo jos jedan nacin:
Enabling AutoRun on your computer
To test AutoRun you need to have it enabled on your computer. A registry setting can be used to disable AutoRun. Click Start+Run then type in regedit. Select Edit+Find and type in NoDriveTypeAutoRun. This value should be found in this key: HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer .
The NoDriveTypeAutoRun value should be hexadecimal 95 if AutoRun is enabled on all CDs, or B5 if disabled for CDs. (If you want to test AutoRun on a floppy disk, set this value to 91.) You may need to change more than one instance of NoDriveTypeAutoRun in the registry. You usually need to reboot for a new value to take effect.
In Windows 95/98/Me the NoDriveTypeAutoRun value is displayed as 95 00 00 00. In Windows NT4, 2000 and XP this value is displayed as 0x00000095 or hexadecimal 95. If you modify the NoDriveTypeAutoRun value make sure it is still in the correct format.
i evo još jedno pitanje, prije kad sam uljučiovao kompjuter, odmah je sve učitao, a sada kada uključim kompjuter, moram kliknit na moj račun, kao da ima dva računa (accounta), kako da to isključim.
Evo jos jedan nacin:
Enabling AutoRun on your computer
To test AutoRun you need to have it enabled on your computer. A registry setting can be used to disable AutoRun. Click Start+Run then type in regedit. Select Edit+Find and type in NoDriveTypeAutoRun. This value should be found in this key: HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer .
The NoDriveTypeAutoRun value should be hexadecimal 95 if AutoRun is enabled on all CDs, or B5 if disabled for CDs. (If you want to test AutoRun on a floppy disk, set this value to 91.) You may need to change more than one instance of NoDriveTypeAutoRun in the registry. You usually need to reboot for a new value to take effect.
In Windows 95/98/Me the NoDriveTypeAutoRun value is displayed as 95 00 00 00. In Windows NT4, 2000 and XP this value is displayed as 0x00000095 or hexadecimal 95. If you modify the NoDriveTypeAutoRun value make sure it is still in the correct format.
Ipak je ovako sigurno bez raznih programcica koji ti jedino mogu stvoriti jos vise problema
******** Repair Wizard је Мајкрософтов "програмчић" и сигурно неће направити никакав проблем. Али добро, што ићи пречицом кад је заобилазно ближе.... некима изгледа.Ipak je ovako sigurno bez raznih programcica koji ti jedino mogu stvoriti jos vise problema
Je si li instalirao možda NetFramework 1.1?? Uđi u User Accounts pogledaj da nemaš tamo treći Accaunt.Administrator i Guest ostavi a ako postoji treći obriši ga...
Evo jos jedan nacin:
Enabling AutoRun on your computer
To test AutoRun you need to have it enabled on your computer. A registry setting can be used to disable AutoRun. Click Start+Run then type in regedit. Select Edit+Find and type in NoDriveTypeAutoRun. This value should be found in this key: HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer .
The NoDriveTypeAutoRun value should be hexadecimal 95 if AutoRun is enabled on all CDs, or B5 if disabled for CDs. (If you want to test AutoRun on a floppy disk, set this value to 91.) You may need to change more than one instance of NoDriveTypeAutoRun in the registry. You usually need to reboot for a new value to take effect.
In Windows 95/98/Me the NoDriveTypeAutoRun value is displayed as 95 00 00 00. In Windows NT4, 2000 and XP this value is displayed as 0x00000095 or hexadecimal 95. If you modify the NoDriveTypeAutoRun value make sure it is still in the correct format.