Amiko SHD-8000 HD PVR Ready Digital satellite Receiver
Features
* High Deffinition Digital Satellite Receiver with Card Reader
* Conax embedded
* Ethernet connection support
* High speed USB 2.0 connection support
* Channel recording using external storage devices
* Time Shifting support
* Electronic Program Guide (EPG) support
* Powerful Channel Control by Favorites , Lock, Skip, Move and Delete
* Channel sorting by Alphabet, Transponder and CAS
* Multi-Language OSD (On-Screen Display) support
* Teletext and subtitle support (OSD & VBI)
* 4 digit (7 Segments) LED Display
* Multi LNB Controlled by DiSEqC Control Version 1.0, 1.1, 1.2 and USALS
* Low Power Consumption sin stand-by
General
System standard: MPEG-Fully DVB-S / DVB-S2 HD compliant
Signal Level: -65dBm to -25dBm
LNB power supply: Vertical polarization voltage: +13V/+14V
Horizontal polarization voltage: +18V/+19V
Max. current - 500mA, Overload protection
22KHz Tone: Frequency: 22±1KHz
DiSEqC: Amplitude: 0.6±0.2V
Version 1.0, 1.1, 1.2, USALS
Demodulation: QPSK, 8PSK
Symbol Rate: 2-45 Mbps, Convolution Code Rate
1/2, 2/3, 3/4, 5/6, 7/8 i Auto
A/V Mode
Video format: MPEG-II Main profile/Main level
Audio format: MPEG-II layer I&II, AC3
Aspect Ratio: 16:9, 4:3 LB, 4:3 PS
Audio sampling rate: 32,44.1, 48kHz
Audio Type: Mono Dual Mono, Stereo, Joint stereo
Graphic display: 720x576(PAL), 720x480(NTSC), 1280*720, 1920*1080(HDTV)
Microprocessor & Memories
Main processor: 396 MHz
Flash memory: 32 Mbit
RAM memory: 1024Mbit
Power & Environment Condition
Supply Voltage: Free Voltage (100~250V AC, 50/60Hz)
Supply Power: Max.12W
Operating temp: 5℃ ~ 45℃
Storage temperature: -10℃ ~ +70℃
Storage Humidity: 5% ~ 95% RH (non condensing)
Physical Specification
Weight: <1.5Kg
Dimensions: 220(W) x 160(D) x 40(H)mm
LED display: 4Digits
Connection
LNB IN: IEC 169-24 Female
LOOP OUT: IEC 169-24 Female
RS232: 9 pin D Rs232 DCE serial port
Scart: TV (CVBS/RGB)
Video: Composite Video CVBS
Audio: Audio left, Audio right
S/PDIF: coaxial Digital Audio Output
USB: 1 slot USB 2.0
HDMI: VER 1.2 Type A
Ethernet: RJ45