Nema autoplaya kada ubacim disk

Ubaci disk, mu computer/ desni klik na F:/ i medju opcijama ima ******** :neutral:
А што баш на F: да кликне? Шта ако нема F: драјв на компу?
nema autoplaya kad ubacim disk, kako da uključim ********?
Из неког од разлога ти "********" не ради, а да не би ишао од ставке до ставке, најлакши начин да га поново укључиш је помоћу тзв. > ******** Repair Wizardа. Када га покренеш, само му означи који је ЦД драјв у питању и кликни на Repair.
 
Унутар групних полиса, налази се и уједно и та полиса за ********, потребно је укључити исту поново. Нема потребе користити програме.
 
Унутар групних полиса, налази се и уједно и та полиса за ********, потребно је укључити исту поново. Нема потребе користити програме.

U pravu si može i ovako:
Start -> Run -> gpedit.msc -> computer konfiguration ili
user configuration ->
Administrator templates -> System.
E tu imas opciju "******** enable" ili "******** disable"
onda ides na properties i uzmes "enable" ili "disable" i
odaberes sta hoces da iskljucis ili uključiš, dal CDROM ili sve.
 
Poslednja izmena:
Postiji više opcija da se ******** uključi, međutim iz ličnog iskustva, ako je korišten Combofix za čišćenje sistema od virusa, nemoguće je uključiti ******** opciju.
Могуће, видиш нисам на то обратио пажњу, али и да јесте, то је чисто превенције ради, како се не би пренело нешто што не бисмо желели да имамо.

Многи и препоручују искључивање аутоплеја.
 
Могуће, видиш нисам на то обратио пажњу, али и да јесте, то је чисто превенције ради, како се не би пренело нешто што не бисмо желели да имамо.

Многи и препоручују искључивање аутоплеја.

Pa vidiš, nekome je problem ako je isključena opcija ********.Kod mene je na svim CD-DVD Drajvovima isključena opcija ********.I u pravu si mnogi upravo preporučuju isključivanje opcije ********...
 
Evo jos jedan nacin:

Enabling AutoRun on your computer

To test AutoRun you need to have it enabled on your computer. A registry setting can be used to disable AutoRun. Click Start+Run then type in regedit. Select Edit+Find and type in NoDriveTypeAutoRun. This value should be found in this key: HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer .

The NoDriveTypeAutoRun value should be hexadecimal 95 if AutoRun is enabled on all CDs, or B5 if disabled for CDs. (If you want to test AutoRun on a floppy disk, set this value to 91.) You may need to change more than one instance of NoDriveTypeAutoRun in the registry. You usually need to reboot for a new value to take effect.

In Windows 95/98/Me the NoDriveTypeAutoRun value is displayed as 95 00 00 00. In Windows NT4, 2000 and XP this value is displayed as 0x00000095 or hexadecimal 95. If you modify the NoDriveTypeAutoRun value make sure it is still in the correct format.
 
Evo jos jedan nacin:

Enabling AutoRun on your computer

To test AutoRun you need to have it enabled on your computer. A registry setting can be used to disable AutoRun. Click Start+Run then type in regedit. Select Edit+Find and type in NoDriveTypeAutoRun. This value should be found in this key: HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer .

The NoDriveTypeAutoRun value should be hexadecimal 95 if AutoRun is enabled on all CDs, or B5 if disabled for CDs. (If you want to test AutoRun on a floppy disk, set this value to 91.) You may need to change more than one instance of NoDriveTypeAutoRun in the registry. You usually need to reboot for a new value to take effect.

In Windows 95/98/Me the NoDriveTypeAutoRun value is displayed as 95 00 00 00. In Windows NT4, 2000 and XP this value is displayed as 0x00000095 or hexadecimal 95. If you modify the NoDriveTypeAutoRun value make sure it is still in the correct format.

e, hvala, opet radi
 
i evo još jedno pitanje, prije kad sam uljučiovao kompjuter, odmah je sve učitao, a sada kada uključim kompjuter, moram kliknit na moj račun, kao da ima dva računa (accounta), kako da to isključim.

Je si li instalirao možda NetFramework 1.1?? Uđi u User Accounts pogledaj da nemaš tamo treći Accaunt.Administrator i Guest ostavi a ako postoji treći obriši ga...
 
Evo jos jedan nacin:

Enabling AutoRun on your computer

To test AutoRun you need to have it enabled on your computer. A registry setting can be used to disable AutoRun. Click Start+Run then type in regedit. Select Edit+Find and type in NoDriveTypeAutoRun. This value should be found in this key: HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer .

The NoDriveTypeAutoRun value should be hexadecimal 95 if AutoRun is enabled on all CDs, or B5 if disabled for CDs. (If you want to test AutoRun on a floppy disk, set this value to 91.) You may need to change more than one instance of NoDriveTypeAutoRun in the registry. You usually need to reboot for a new value to take effect.

In Windows 95/98/Me the NoDriveTypeAutoRun value is displayed as 95 00 00 00. In Windows NT4, 2000 and XP this value is displayed as 0x00000095 or hexadecimal 95. If you modify the NoDriveTypeAutoRun value make sure it is still in the correct format.

Ipak je ovako sigurno bez raznih programcica koji ti jedino mogu stvoriti jos vise problema :)
 
Ipak je ovako sigurno bez raznih programcica koji ti jedino mogu stvoriti jos vise problema :)
******** Repair Wizard је Мајкрософтов "програмчић" и сигурно неће направити никакав проблем. Али добро, што ићи пречицом кад је заобилазно ближе.... некима изгледа. ;)
 
Evo jos jedan nacin:

Enabling AutoRun on your computer

To test AutoRun you need to have it enabled on your computer. A registry setting can be used to disable AutoRun. Click Start+Run then type in regedit. Select Edit+Find and type in NoDriveTypeAutoRun. This value should be found in this key: HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer .

The NoDriveTypeAutoRun value should be hexadecimal 95 if AutoRun is enabled on all CDs, or B5 if disabled for CDs. (If you want to test AutoRun on a floppy disk, set this value to 91.) You may need to change more than one instance of NoDriveTypeAutoRun in the registry. You usually need to reboot for a new value to take effect.

In Windows 95/98/Me the NoDriveTypeAutoRun value is displayed as 95 00 00 00. In Windows NT4, 2000 and XP this value is displayed as 0x00000095 or hexadecimal 95. If you modify the NoDriveTypeAutoRun value make sure it is still in the correct format.

e, sada radi za CD, ali kada ubacim USB u kompjuter, još uvek to radi
 

Back
Top